Product design

Monsoon drying cabinet

A compact clothes-drying cabinet for homes during the monsoon, designed to look like furniture rather than another appliance.

Drying cabinet with grooved light-oak doors, bronze handles and a white base.

What we designed

Clothes can take days to dry during the monsoon. Hanging them indoors takes up space and adds moisture to the room.

We designed a compact drying cabinet to contain that moisture and fit into a home like a wardrobe. The work covered the product design, CAD assembly and layout of the drying system.

For
Compact homes in humid climates
Size
800 W × 635 D × 1850 H mm
Materials
Light oak, coated steel and bronze handles

How it dries clothes

The design circulates air through a sealed clothes compartment. An evaporator removes moisture from the air, and a condenser reheats it before it passes through the clothes again. The collected water drains into a removable tank.

We placed the drying equipment in the base, leaving the space above for hanging clothes.

Drying equipment arranged on the base tray, including two coils, a blower, a compressor and a water tank.
The drying equipment and removable water tank fit below the clothes compartment.

Space for six hangers

The cabinet is 800 mm wide and 1850 mm tall, with a single rail for six hangers. There is about 1100 mm of space below the hanger shoulders for clothes to hang.

We used grooved oak doors, bronze handles and a white base to give it the appearance of furniture. The controls sit along the top of the cabinet.

Front view of the cabinet showing the oak doors, bronze handles, white base and controls along the top.
Side view of the cabinet showing the white side panel and projecting door handle.

Access for cleaning and emptying

The lint filter and water tank are accessible from the front. The filter lifts out from under the floor grille, and the tank sits in a drawer that opens without tools.

We left 24 mm of finger clearance behind the door handles. The oak panels sit outside the sealed compartment to keep them away from the damp air.

Close-up of the bronze handles on the grooved oak doors.
The handles leave 24 mm of space for your fingers.

What we delivered

We created a 206-part CAD assembly and a concept brief covering the cabinet’s dimensions, operation, manufacturing and servicing requirements.

The next stage is to work with a supplier on refrigeration sizing, airflow and safety engineering. Those checks are still needed before the design can move into production.

Rear view of the cabinet showing the white back panel and two black cover plates.

Discuss your product idea with us.

Send us a sketch or a written description. We’ll discuss the design support you need and how quickly you need it completed.

Book a call