Product design

Task chair

A functional office chair with adjustable seat height and wheels for easy movement around the office.

Task chair with a tall mesh back, headrest, lumbar pad, adjustable armrests and a five-star base on casters.

The problem

A task chair has to fit a wide range of people: from a 5th-percentile woman to a 95th-percentile man, feet flat, thighs evenly supported, back held.

We wanted a model where every one of those dimensions is a named parameter you can change, not a fixed shape.

Fit
5th-percentile female to 95th-percentile male
Seat height
380–530 mm
Recline
95° to 120°, synchro-tilt
Arm-pad spacing
350–510 mm

The first version

We mapped the dimensions and linked adjustments, then built a parametric assembly of 125 solids: seat height from 380 to 530 mm, adjustable depth, synchro-tilt from 95° to 120°, 4D armrests, a five-star base on 60 mm twin-wheel casters.

It was complete, but it looked boxy and not ergonomic. It read as an engineering layout, not a chair you would want to sit in.

Finding the form

Working from a reference, we reshaped it while keeping every parameter. The back grew taller, with rounded shoulders and a lower sweep. The cushion edges rolled. The slab headrest and straight base legs became curved, and the mesh became finer so it reads as fabric.

Checking the extremes caught two clashes in the lowest, most reclined pose. We added clearance at the base and a small linked rearward motion of the back.

Task chair in profile, showing the S-curve of the mesh back and the headrest.
Task chair from the rear three-quarter, showing the back frame and spine.

Getting the support right

Then we asked whether it would really support a back and arms. The lumbar bolster was prominent enough to press rather than support, and the arms sat wide for smaller people.

We gave the lumbar a gentler shape and narrowed it to a central 340 mm pad. The arm pads now adjust inward to 350 mm. The seat got breathable fabric over two layers of PU foam, and twelve sampled adjustment cases came back free of collisions.

Cutaway of the seat showing fabric over two foam layers on a rigid shell.
Fabric over two layers of PU foam.
Close-up of a 4D armrest with its cushioned forearm pad.
Cushioned forearm pads on 4D arms.

The result

A chair you can edit by its dimensions: an editable assembly with a parameter guide. The next step is a full-size seated mock-up.

Task chair from the front, showing the mesh back, lumbar pad, headrest and both armrests.

Start with what you have.

A sketch, a reference, a rough idea. Let’s figure out the next step together.

Book a call